Primary Mechanical Fitter – High Voltage This job is in the Netherlands Are you a mechanical fitter with experience in high-voltage environments? Ready to take your skills to the next level in one of Europe’s most innovative engineering hubs? Join a top-tier Dutch electrical engineering company that’s making major moves across industry, infrastructure, and energy.

About the Company: Our client specializes in large-scale electrical engineering projects in sectors like maritime, panel construction, utilities, infrastructure, and energy transition. Their 150+ skilled professionals—including electricians, panel builders, and technicians—support a wide range of long- and short-term projects, from industrial facilities and luxury yachts to tunnels, bridges, and energy grids. Note: This company does not handle residential work.

What You’ll Be Doing: As a Primary High-Voltage Mechanical Fitter, you’ll work on-site at high-voltage locations (110/220 kV and 380 kV), where you’ll handle the mechanical installation of critical power distribution components. You'll work both indoors and outdoors, always with strict attention to safety. You’ll be responsible for:

• Installing transformers, circuit breakers, voltage transformers, and disconnectors

• Mounting insulators and metal support structures • Placing cableways and routing cables • Reading and interpreting technical schematics and system drawings

Your Skills & Experience:

We’re looking for professionals with proven experience in: • Power transformer and voltage transformer placement • Circuit breaker and disconnector installation • Installing insulators and cableways • Interpreting electrical and mechanical schematics • Working safely on high-voltage sites

Offer:

You will be paid on a weekly basis. Your salary is based on your experience.

We can offer candidates a net salary starting from € 625,- based on a 40-hour

workweek and your level of experience. In some cases, extra hours can be

worked, and the salary will be higher. Unfortunately, we cannot guarantee

overtime. Health insurance and accommodation are included.

Payment is based on the following components:

• Cost of Living allowance

• Travel expenses from home country to the Netherlands

• Travel expenses up to 27 kilometers from accommodation to project per day*

• Payment for extra-statutory holidays

• Holiday pay

• Health insurance

• Deduction of housing

*Additional kilometers are reimbursed at €0.21 per kilometer, both for the driver and passengers.

Important: In addition to your salary, you also accrue vacation hours.

Rotations & Vacation Hours:

You will work in rotations. After working for 10 weeks, it is common to take 1 to 2

weeks of vacation. It is important to know that, in addition to your agreed net

salary, you also accrue vacation hours each week. For example, if you work for

10 weeks, you will have accrued approximately 30 hours of vacation time. You

can use these hours to take a vacation or rotation.

Accommodation:

We arrange accommodation for our colleagues. Currently, the average distance

between the accommodation and the project site is 30 kilometers. The

accommodation is shared with several people, but everyone always has their

own bedroom.

In addition to their weekly net salary, each skilled worker also receives a travel

allowance from their accommodation to the project and back. The first 27 km per

day is already included in the net salary. All extra kilometers are reimbursed at a

rate of € 0.21 per kilometer. The total weekly salary can therefore be increased

by € 1.00 - € 50.00 extra per week.

Car Lease: Our client will provide you with the option to lease a car: a Mitsubishi SpaceStar (2024),

Seat MII (2021) or Hyundai 2025. And for a reduced rate, you can drive to work every

day without any worries! You will pay around €65.00 to €70.00 per week and this

amount will be deducted from your salary weekly. Just let us know if you are interested

and we’ll arrange for you to sign your lease agreement. And then you’ll receive your car

keys and fuel or charging card.

Requirements:

1. You must have a valid driver’s license.

2. You are required to take 1 to 3 passengers to the project.

3. Travel costs from accommodation to the project will be canceled.

Tip: Ask colleagues for a small contribution if they carpool—drive cheaper!

Health insurance:

Our client provides health insurance. If medical assistance is needed in the Netherlands, it is readily available.

BSN & Certifications:

If you want to work in the Netherlands, you need to have a BSN (Citizen Service

Number), and you’ll require certain certifications. Our client will make an

appointment with the municipality to obtain a BSN. For VCA or Sky platform

(IPAF), an exam needs to be taken. Our client will provide study materials to

help you prepare and will cover the cost of the first exam. It is very achievable

to pass the exam if you are an experienced electrician and have studied. Any

subsequent attempts will need to be paid for by the individual.

Build the Future of Power

If you’re ready to work with powerful tech, in high-stakes environments, and

with a team that values your skills – Send us your CV now and start shaping

the future of energy across the Netherlands

Yacht & Shipbuilding Electricians This job is in the Netherlands Step aboard a project that demands the highest standards in craftsmanship. As a

Yacht & Shipbuilding Electrician, you’ll wire and install systems on some of the

world’s most advanced and luxurious vessels. This role combines your technical

know-how with the artistry of building at sea.

Our client leads electrical engineering projects in industrial, maritime, energy, and

infrastructure sectors. They support everything from factories to tunnels to top-tier

yachts.With a team of 150 skilled workers, including electricians, panel builders,

E&I technicians, and foremen, they support a wide range of projects. Most of our

projects are long-term (over 1 year), but they also have short-term projects (6 to 8

weeks).

What You’ll Be Doing: You’ll handle both low- and high-voltage installations—lighting systems, navigation panels, communication gear, engine controls, and more. From control panels to cable placement, you’ll ensure each system is built to perfection, with safety and elegance in mind.

Your Core Skills:

• Automation & Control (Wiring)

• Connecting Control panels

• Connecting Distribution boards

• Connecting Bridge Consoles

• Connecting Multicore and single core cables

• Connecting Motors & Pumps

• Placing and pulling electrical cables, cableway placement

• Roxtec sealing

• Electrical Schematics Reading

Offer:

You will be paid on a weekly basis. Your salary is based on your experience.

We can offer candidates a net salary starting from € 2700,- per month up to

€3600,- per month based on a 40-hour workweek and your level of experience. In

some cases, extra hours can be worked, and the salary will be higher.

Unfortunately, we cannot guarantee overtime. Health insurance and

accommodation are included.

Payment is based on the following components:

• Cost of Living allowance

• Travel expenses from home country to the Netherlands

• Travel expenses up to 27 kilometers from accommodation to project per day*

• Payment for extra-statutory holidays

• Holiday pay

• Health insurance

• Deduction of housing

*Additional kilometers are reimbursed at €0.21 per kilometer, both for the driver and passengers.

Important: In addition to your salary, you also accrue vacation hours.

Rotations & Vacation Hours:

You will work in rotations. After working for 10 weeks, it is common to take 1 to

2 weeks of vacation. It is important to know that, in addition to your agreed net

salary, you also accrue vacation hours each week. For example, if you work for

10 weeks, you will have accrued approximately 30 hours of vacation time. You

can use these hours to take a vacation or rotation.

Accommodation:

Our client arranges accommodation for you. Currently, the average distance

between the accommodation and the project site is 30 kilometers. The

accommodation is shared with several people, but everyone always has their

own bedroom.

In addition to your weekly net salary, you will also receive a travel allowance

from your accommodation to the project and back. The first 27 km per day is

already included in the net salary. All extra kilometers are reimbursed at a rate

of € 0.21 per kilometer. The total weekly salary can therefore be increased by

€ 1.00 - € 50.00 extra per week.

Car Lease: Our client will provide you with the option to lease a car: a Mitsubishi SpaceStar (2024),

Seat MII (2021) or Hyundai 2025 . And for a reduced rate, you can drive to work every

day without any worries! You will pay around €65.00 to €70.00 per week and this

amount will be deducted from your salary weekly. Just let us know if you are interested

and we’ll arrange for you to sign your lease agreement. And then you’ll receive your car

keys and fuel or charging card.

Requirements for Car lease:

1. You must have a valid driver’s license.

2. You are required to take 1 to 3 passengers to the project.

3. Travel costs from accommodation to the project will be canceled.

Pro tip!: Ask your colleagues to carpool with you for a small contribution. This way,

you’ll drive even more affordably!

Health insurance:

Our client provides health insurance. If medical assistance is needed in the Netherlands, it is readily available.

BSN & Certifications:

If you want to work in the Netherlands, you need to have a BSN (Citizen Service

Number), and you’ll require certain certifications. Our client will make an

appointment with the municipality to obtain a BSN. For VCA or Sky platform

(IPAF), an exam needs to be taken. Our client will provide study materials to

help you prepare and will cover the cost of the first exam. It is very achievable

to pass the exam if you are an experienced electrician and have studied. Any

subsequent attempts will need to be paid for by the individual.

Wiring the future of maritime excellence.

If you're ready to bring your skills to the deck and electrify some of the most

exciting vessels in Europe – send us your resume today!

E&I Technician (Netherlands) Where precision meets power—your expertise makes it all run smoothly!

Are you an expert in both electrical systems and instrumentation? Does fine-tuning automation systems and calibrating tech like flow meters and sensors sound like your kind of workday? If you're nodding along, you're already the kind of person we're looking for.

Our client is a specialist in major electrical engineering projects across industries like maritime, industrial, infrastructure, and energy transition. From tunnels and yachts to factories and bridges—this team does it all (except residential!). With over 150 skilled professionals, their projects are high-caliber, long-term, and deeply rewarding.

Our client does not handle electrical work in houses and apartments. Most of the projects are long-term (over 1 year), but they also have short-term projects (6 to 8 weeks). What You’ll Be Doing:

As an E&I Technician, you’ll be the one bringing installations to life—testing, calibrating, wiring, and making sure everything works just right. You’ll work on both high and low voltage systems, PLCs, pneumatic systems, transformers, and a range of instrumentation. You’ll also be involved in inspections and detailed reporting—every detail matters here. Knowledge of automation and experience with DCS systems and PLCs (Siemens S7) is a must.

• You’ll be testing and commissioning of electrical systems and instrumentation (parts of a complete installation).

• You are responsible for securing installations (switching high and low voltage installations); You are responsible for the repair, revision, installation, maintenance, and modification of automation systems, both pneumatic and electrical, PLC and computer-controlled equipment and installations.

• You carry out modifications and inspections on existing or new installations; you perform inspections, measurements, and tests and provide the corresponding reports. You calibrate control equipment, flow meters, oxygen analyzers, and gas chromatographs using the necessary E&I measuring equipment.

Your Key Tasks:

• Control wiring

• Automation & Control (Wiring and Startup)

• Flowcharts reading

• PLC/ DCS system Trouble shooting

• PLC/ DCS system Installing & Connecting

• Multicore cable connecting

• Functional checks

• Loop testing

• I/O checks

• Cold Wire Checks

• Connecting Main distribution cabinets & power distributers

• Cabinet Switchboards wiring & Connecting

• Connecting Power circuit Breakers

• Connecting and Setting of different kinds of sensors

• Junction Boxes Placement & Wiring

• Hydraulic and Pneumatic systems

• Low Voltage

• Inverters Setup and installation

• Installing Transformers

• Flowcharts reading • Electrical Schematics reading

Offer:

You will be paid on a weekly basis. Your salary is based on your experience.

We can offer candidates a net salary ranging weekly starting from € 2700,- per

month up to €3600,- per month based on a 40-hour workweek and your level of

experience. In some cases, extra hours can be worked, and the salary will be

higher. Unfortunately, we cannot guarantee overtime. Health insurance and

accommodation are included.

Payment is based on the following components:

• Cost of Living allowance

• Travel expenses from home country to the Netherlands

• Travel expenses up to 27 kilometers from accommodation to project per day*

• Payment for extra-statutory holidays

• Holiday pay

• Health insurance

• Deduction of housing

*Additional kilometers are reimbursed at €0.21 per kilometer, both for the driver and passengers.

Important: In addition to your salary, you also accrue vacation hours.

Rotations & Vacation Hours:

You will work in rotations. After working for 10 weeks, it is common to take 1 to

2 weeks of vacation. It is important to know that, in addition to your agreed net

salary, you also accrue vacation hours each week. For example, if you work for

10 weeks, you will have accrued approximately 30 hours of vacation time. You

can use these hours to take a vacation or rotation.

Accommodation:

Our client arranges accommodation for you. Currently, the average distance

between the accommodation and the project site is 30 kilometers. The

accommodation is shared with several people, but everyone always has their

own bedroom.

In addition to your weekly net salary, you will also receive a travel allowance

from your accommodation to the project and back. The first 27 km per day is

already included in the net salary. All extra kilometers are reimbursed at a rate

of € 0.21 per kilometer. The total weekly salary can therefore be increased by

€ 1.00 - € 50.00 extra per week.

Health insurance:

Our client provides health insurance. If medical assistance is needed in the Netherlands, it is readily available.

BSN & Certifications:

If you want to work in the Netherlands, you need to have a BSN (Citizen Service

Number), and you’ll require certain certifications. Our client will make an

appointment with the municipality to obtain a BSN. For VCA or Sky platform

(IPAF), an exam needs to be taken. Our client will provide study materials to

help you prepare and will cover the cost of the first exam. It is very achievable

to pass the exam if you are an experienced electrician and have studied. Any

subsequent attempts will need to be paid for by the individual.

Precision. Performance. Progress.

If you're ready to join an amazing team that values all three - apply today!

Industry & E&I Electrician This job is in the Netherlands Bring your expertise to electrifying industrial projects! Are you a skilled electrician who thrives in complex industrial environments? Do you enjoy working with both electrical systems and instrumentation? If you're nodding along, this might just be your perfect next job. Our client is a powerhouse in electrical engineering across industries like maritime, infrastructure, energy transition, and large-scale industrial construction. They don't touch residential work—instead, they focus on high-impact projects like factories, tunnels, luxury yachts, and bridges. With a team of 150+ technical specialists, they’re building the future of smart electrical systems. Most of the projects are long-term (over 1 year), but they also have short-term projects (6 to 8 weeks).

What You’ll Be Doing: You’ll be hands-on with process installations, handling both preventive and corrective maintenance on electrical and instrumentation systems. From connecting multicore cables in junction boxes to working with transformers and control panels, this role is packed with variety—and impact.

Your Key Tasks:

• Electrical & Instrumentation installation and maintenance

• Automation, control wiring, and S7 systems

• Connecting transformers, breakers, motors, and pumps

• Laying and pulling cables, ironwork, and cable trace building

• Reading electrical schematics, P&ID drawings, and hook-ups

• Connecting multicore cables using Hawke, CMP, and other glands

• Working with junction boxes, valves, and distribution boards Offer:

You will be paid on a weekly basis. Your salary is based on your experience.

We can offer candidates a net salary ranging weekly starting from € 2700,- per

month up to based on a 40-hour workweek and your level of experience. In some

cases, extra hours can be worked, and the salary will be higher. Unfortunately,

we cannot guarantee overtime. Health insurance and accommodation are

included.

Payment is based on the following components:

• Cost of Living allowance

• Travel expenses from home country to the Netherlands

• Travel expenses up to 27 kilometers from accommodation to project per day*

• Payment for extra-statutory holidays

• Holiday pay

• Health insurance

• Deduction of housing

*Additional kilometers are reimbursed at €0.21 per kilometer, both for the driver and passengers.

Important: In addition to your salary, you also accrue vacation hours.

Rotations & Vacation Hours:

You will work in rotations. After working for 10 weeks, it is common to take 1 to

2 weeks of vacation. It is important to know that, in addition to your agreed net

salary, you also accrue vacation hours each week. For example, if you work for

10 weeks, you will have accrued approximately 30 hours of vacation time. You

can use these hours to take a vacation or rotation.

Accommodation:

Our client arranges accommodation for you. Currently, the average distance

between the accommodation and the project site is 30 kilometers. The

accommodation is shared with several people, but everyone always has their

own bedroom.

In addition to your weekly net salary, you will also receive a travel allowance

from your accommodation to the project and back. The first 27 km per day is

already included in the net salary. All extra kilometers are reimbursed at a rate

of € 0.21 per kilometer. The total weekly salary can therefore be increased by

€ 1.00 - € 50.00 extra per week.

Health insurance:

Our client provides health insurance. If medical assistance is needed in the Netherlands, it is readily available.

BSN & Certifications:

If you want to work in the Netherlands, you need to have a BSN (Citizen Service

Number), and you’ll require certain certifications. Our client will make an

appointment with the municipality to obtain a BSN. For VCA or Sky platform

(IPAF), an exam needs to be taken. Our client will provide study materials to

help you prepare and will cover the cost of the first exam. It is very achievable

to pass the exam if you are an experienced electrician and have studied. Any

subsequent attempts will need to be paid for by the individual.

Ready to take charge of your next challenge?

Apply now and plug into a role that powers progress, every single day.

Panel Builder This job is in the Netherlands Are you a whiz with wires? Do you get a spark of joy from creating precision-built control panels? Then read on—we might just have your next great opportunity! With a team of 150+ skilled professionals, including electricians, panel builders, E&I technicians, and foremen, they support a wide range of projects. From large industrial projects and factories to luxury yachts and production locations for panel construction. Additionally, they work on infrastructure projects, such as bridges, tunnels, and locks. Distribution centers are also part of their work area. Our client does not handle electrical work in houses and apartments. Most of the projects are long-term (over 1 year), but they also have short-term projects (6 to 8 weeks).

What You’ll Be Doing: As a Panel Builder, you’ll bring drawings to life by assembling and wiring power distribution units and control panels. You’ll be working with components like frequency converters, PLCs, and copper busbars to build systems that are both reliable and safe. All of this is based on drawings. Expect your days to be hands-on, focused, and satisfying.

Your Key Tasks:

• Assemble and wire control and distribution cabinets

• Construct back panels and build cable traces

• Work with ironworks and copper busbars

• Follow technical drawings like a pro Offer:

You will be paid on a weekly basis. Your salary is based on your experience.

We can offer candidates a net salary ranging weekly starting from € 625,- based

on a 40-hour workweek and your level of experience. In some cases, extra hours

can be worked, and the salary will be higher. Unfortunately, we cannot guarantee

overtime. Health insurance and accommodation are included.

Payment is based on the following components:

• Cost of Living allowance

• Travel expenses from home country to the Netherlands

• Travel expenses up to 27 kilometers from accommodation to project per day*

• Payment for extra-statutory holidays

• Holiday pay

• Health insurance

• Deduction of housing

*Additional kilometers are reimbursed at €0.21 per kilometer, both for the driver and passengers.

Important: In addition to your salary, you also accrue vacation hours.

Rotations & Vacation Hours:

You will work in rotations. After working for 10 weeks, it is common to take 1 to

2 weeks of vacation. It is important to know that, in addition to your agreed net

salary, you also accrue vacation hours each week. For example, if you work for

10 weeks, you will have accrued approximately 30 hours of vacation time. You

can use these hours to take a vacation or rotation.

Accommodation:

We arrange accommodation for our colleagues. Currently, the average distance

between the accommodation and the project site is 30 kilometers. The

accommodation is shared with several people, but everyone always has their

own bedroom.

In addition to their weekly net salary, each skilled worker also receives a travel

allowance from their accommodation to the project and back. The first 27 km

per day is already included in the net salary. All extra kilometers are

reimbursed at a rate of € 0.21 per kilometer. The total weekly salary can

therefore be increased by € 1.00 - € 50.00 extra per week.

Health insurance:

Our client provides health insurance. If medical assistance is needed in the Netherlands, it is readily available.

BSN & Certifications:

If you want to work in the Netherlands, you need to have a BSN (Citizen Service

Number), and you’ll require certain certifications. Our client will make an

appointment with the municipality to obtain a BSN. For VCA or Sky platform

(IPAF), an exam needs to be taken. Our client will provide study materials to

help you prepare and will cover the cost of the first exam. It is very achievable

to pass the exam if you are an experienced electrician and have studied. Any

subsequent attempts will need to be paid for by the individual.

Ready to wire up your next big opportunity?

Apply now and join a team that builds with precision, purpose, and pride!